SONOFF ZBMINIL2 No Neutral Wire Required Zigbee Smart Switch MINI Support 2 Way Control eWeLink APP Works for Google Home Alexa
Computer Peripherals
“The SONOFF ZBMINIL2 is a highly compact Zigbee 3.0 relay that enables smart control in older homes without a neutral wire. While it lacks Zigbee routing capabilities and requires a minimum 3W load to prevent flickering, its small form factor and broad compatibility with Home Assistant (ZHA/Zigbee2MQTT) make it a top choice for space-constrained smart home setups.”
- —
Compact 4x3x2cm dimensions allow installation in tight, space-constrained electrical junction boxes.
sonoff.inIt measures 4 cm wide by 3 cm long and 2 cm thick, making it fit perfectly into my small junction boxes.
- —
Supports both latching and momentary switches for flexible physical control configurations.
smart-wired.comThe ZBMINI-L2 supports both latching (standard rocker) and momentary switches.
- —
Enables local-only control via Home Assistant, ensuring functionality during internet outages.
jpk.ioBecause the control loop is local Zigbee, the light responds even when my Home Assistant server is rebooting
- —
Functions as an end device only and does not act as a Zigbee signal repeater.
zigbee2mqtt.ioThe device type is 'End Device' and cannot function as a Zigbee router.
- —
Requires a minimum load of approximately 3W to avoid flickering or power failure.
smart-wired.comThe ZBMINI-L2 requires a minimum load of approximately 3W. With LED bulbs below this threshold, you may experience flickering
- —
Installation can be difficult in tight back boxes due to limited space for wiring.
smart-wired.comThe unit is compact enough to fit in most standard 35mm UK/EU back boxes, though it's tight
- —
The only negative point is that it is not a Zigbee router (like most modules without a neutral wire).
sonoff.inThe only negative point is that it is not a Zigbee router (like most modules without a neutral wire).